• SEW|SEW電機|SEW減速機|SEW變頻器|NORD減速機|諾德減速機/MDX61B/MCV41A/MC07B/ES1R/ES1S/ES1T/ES1C-深圳市大坤科技有限公司 中文版 English
     
     
    Product list
    Search
    Keywords:
    Range:
    HomeProducts
    Window mode   List mode   Introduction mode
     
      R series Helical Gearmotors
    Specification:
       SEW coaxial geared motors with excellent performance, especially well-known for mechanical efficiency and transmission durability.
       R series Helical Gearmotors (single, two-stage, three-stage size) with high permitted overhung loads Foot-mounted, flange-mounted, foor and flange-mounted RM series gear redactors with extended bearing hub will be available especially for stirrer.
       R series as well as RM series suitable for stirrer
    Output speed: 0.05 to 809 rpm
    Output torque: ≤18000 Nm
    Motor power range: 0.12 to 160 kw
      F series Parallel Shaft Helical Gearmotors
    Our extra-slim parallel shaft helical gearmotors are the perfect solution when installation space is limited. The many different sizes and designs ensure that the gearmotors can be used in a wide variety of applications even under the most unfavorable conditions. Sew parallel shaft helical gearmotors are typically used in conveyor and materials processing applications. You can choose from foot-mounted, flange-mounted or shaft-mounted options. Reduced backlash parallel shaft helical gear units are also available on request for precise positioning tasks.
    Available versions:
    - Foor-mounted or flange-mounted
    - B5 or B14 Flange-mounted
    - Solid or hollow shaft
    - Hollow shaft with keyed connection, shrink disk, splined hollow shaft
    F series technical data:
    Output speed 0.1 to 752 rpm
    Output torque ≤18000 Nm
    Motor power range 0.12 to 200 kw
      K series Helical-Bevel Gearmotors

    Sew right angle gear units include: Helical-Bevel Gearmotors, Helical –Worm Gearmotors and Spironplan Gearmotors, with various mounting position, suitable for different application sites.
    Available versions:
    - Foot-mounted or flange-mounted
    - B5 or B14 Flange-mounted
    - Solid or hollow shaft
    - Hollow shaft with keyed connection, shrink disk, splined hollow shaft
    K series three-stage Helical-Bevel Gear units are of high efficiency also with high service life.
    Torque range for low backlash K, R series is between 200 and 8000 Nm in specified ratio range when circumferential backlash is less than 10’.
    K series technical data:
    Output speed from 0.1 to 522 rpm
    Output torque less than 50000 Nm (also in reduced backlash version)
    Motor power range from 0.12 to 200 kw

      S series Helical-Worm Gearmotors

    SEW helical-worm gear units are helical/helical-worm combinations, so they are more efficient than normal helical-worm gear units. Due to their outstanding efficiency, these drives can be used in every industrial sector and tailored to individual torque and speed requirements. The gear ratios afforded by the helical-worm gear stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for simple applications.

    Available versions:
    - Foot-mounted or flange-mounted
    - B5 or B14 Flange-mounted
    - Solid or hollow shaft
    - Hollow shaft with keyed connection, shrink disk, splined hollow shaft

    S series Technical data:
    Output speed from 0.1 to 397 rpm
    Output torque from 43 to 4000 Nm
    Motor power range from 0.12 to 22 kw

      SEW Roller motor

    SEW roller tables motors is designed for the need of special conditions in metallurgy and iron steel industry according to DIN standard and SEW factory standard.
    Feature:
    Starting torque is more than 2.5 times rated torque, the maximum torque will be up to over 3.5 times of rated torque
    Long overload, strong impact resistance
    Starting / braking up to 600c / h when working with frequency inverter
    Wide frequency-alterable range, constant torque operation under 50Hz, constant power operation above 50Hz
    Motor benchmark working S1, and it will be also applied into S2-S9 working during inverter control
    Encoder can be installed for closed-loop control
    High-intensity cast iron material for motor flange

    Power range: from 1.5kw to 55kw
    Rated frequency: 50Hz
    Rated voltage: Y connection, 380V
    Motor pole: 4 poles, 6 poles
    Protection class: IP55, IP56
    Insulation class: class F, H
    Cooling way: IC411, IC410, IC416
    Thermal protection: TF, TH
    Accessories: encoder, forced fan etc

    Total:62Record Page:1/13 Each page:5records      1 [2][38 :
     
     
    FAX:0086-755-29164261 ADD:2L, Sail Business Building, Shenfeng Road No.3, Henggang Street, Longgang District, Shenzhen   
      TEL:0755-29834245 0755-29164277 0755-27042131 0755-28319594
      Shenzhen Dakun Technology ? 2009-2015 CopyRight Website by1dto.com   Admin center  備案號: 粵ICP備09168546號  
        Email:sales@szdakun.com  
    3分28